Flange Adaptors
FLANGE ADAPTORS
For joining a flanged part to the spigot end of pipes or tubes
Used to connect networks composed of different materials or specially designed for one material, flange adaptors join a flanged part to the spigot end of a pipe or tube. They come in anchoring or non-anchoring versions, while the self-anchoring (locking) products do not necessitate concrete anchor blocks.
Available products
UltraQuick flange adaptor
Very broad tolerance for use with a variety of materials
Can be fitted to grey cast iron, ductile cast iron and fibre cement pipes as well as to steel or PVC tubes
Available for continuous lengths of pipe with exterior diameters between DE 49 and 348 mm and a PFA of 16 bar
Substantial angular deflection at approximately 6°
Multi-pitch circle flange PN 10 and 16
Quick GS, flange adaptor for ductile iron pipes
Available from DN 60 to DN 200 in the anchoring version and from DN 60 to DN 300 in the non-anchoring version
PFA of 16 bar for both versions
Multi-pitch circle flange PN 10 and 16
Quick GS, flange adaptor for ductile iron pipes with large diameters
Available from DN 350 to DN 1000 in a non-anchoring version
PFA of between 10 and 16 bar
Quick PVC automatic anchoring flange adaptor for PVC
Available from DN 40/DE 40 to DN 200/DE 225 in anchoring and non-anchoring versions
PFA of 16 bar for both versions
Multi-pitch circle flange with PN 10 and 16
A simple or anchored QuickBlutop range exists for possible assembly only on BLUTOP (DE 60 to DE 150 mm) pipes
Quick PE mechanical anchoring flange adaptor for PE
Available from DN 50/DE 63 to DN 400/DE 400
PFA of 16 bars
Multi-pitch circle flange with PN 10 and 16